METALS REMOVAL MODULE (MRM)

The raw water produced through the MRM process is classed as high quality, which can, in turn, be safely and re-injected back into the aquifer or discharged into the stormwater system. The MRM can remove contaminants such as Manganese, Zinc, Arsenic and other heavy metals. While each MRM can comfortably process 15 L/s. of raw water, it can be further customised to process higher or lower discharge rates (subject to water analysis). The MRM is an effective water treatment solution for projects with stringent discharge criteria, as this method is capable of treating the harshest and most corrosive groundwater and has been proven to remove iron levels down to ≤ 0.3 mg/L. The MRM units are set up in conjunction with additional water treatment modules such as clarifiers, settlement tanks and aeration tanks. All materials used to build the water treatment system comply with Australian Standards.

MRM Features:

• Fully automated and self-contained
• Web-Based Remote Monitoring and adjustment
• Programmable logic controller (PLC) with Human
• Machine Interface (HMI) touchscreen
• Self-adjusting pumps
• Backwash cycle
• Water Pressure/Level Alarm system
• Insulated and Ventilated
• Fully Bunded Chemical storage
• Minimal Noise/Vibrations
• Safety features such as Isolation Switch, eyewash
• and chemical handling PPE
• Custom-built to suit space and treatment
• requirement
• Portable, can be safely stacked at a height

Specifications:

• Area footprint: 6 m x 3 m (minimum)
• Height: 2.7 m
• Gross Weight: 15000 kg
• Minimum Flow rate: N/A
• Optimum flow rate: 15 l/s
• Power supply: 32 amps 3ph
• Maximum chemical capacity: 800 l
• Maximum Bund Capacity: 1000 l