QC150M Diesel Drive Auto Prime Pump
The SPP AUTOPRIME QC150M pump is a fully enclosed diesel driven pump unit with high efficiency, designed to pump most liquids including sewage and semi solids. The enclosure provides sound reduction and security for use in noise sensitive areas. Typical uses include removal of ground and rain water from excavations, trenches, footings, manholes and ponds. May also be used for stream and pipe diversions and flood water control, well point dewatering, pipe relining and sludge pumping.
KEY FEATURES
- Bunded unit on optional two-wheel road trailer or skid
- 12 volt battery starting by key switch with optional automatic stop/start capability
- Pump will pass solids up to 65mm diameter and 80mm long
- Reliable double mechanical seals which allow dry running
- Pump can be left running when liquid is exhausted and will prime automatically when liquid is present
- Rugged construction requires minimal operator maintenance
- 65 cfm vacuum pump with coalescer to filter exhaust air before emission into the atmosphere
- Features efficient ‘Smartprime’ technology for energy saving and reliability
PUMP PERFORMANCE CURVE
TECHNICAL SPECIFICATIONS
| Flow Rate | 111L/S Maximum |
| Discharge Head | 36m Maximum |
| Working Pressure | 10 bar Maximum |
| Suction Hose Size | 200mm (8in) Diameter |
| Delivery Hose Size | 150mm (6 in) Diameter |
| Max Soilds Size | 65mm Diameter x 80mm |
| Pump Casing | Cast Iron |
| Impeller | SG Iron |
| Pump Shaft | Stainless Steel |
| Wear Plates | SG Iron |
| Suction Pump | Cast Iron |
| Shaft Seal | Silicon Carbide/Silicon Carbide |
| Elastomer | Viton |
| Diesel Engine | CAT C2.2N |
| Starting | 12 Volt Battery by Key Switch |
| Sound Pressure | 65 dB (A) at 7 metres |
| Fuel Tank Capacity | 220 litres |
| Full Load Consumption | 6.5 litres/hour average |
| Full Load Running Time | 34 hours |
| Chassis Options | Skid Mounted or Pod for Mounting |
| Approx Wet Weight | 1500kg on trailer |