The pump system consists of a centrifugal pump and a vacuum pump - making automatic priming possible. The machine quickly removes the air from the suction pipe and begins to pump, even at suction heights of several metres. The PAS MF series is also appropriate for pumping liquids with suspended solids because of the semi-open impeller.
KEY FEATURES
- Pump High Efficiency 68% (BEP)
- Rapid "DRY" Priming Up to a Height of 7.5m (24.6ft)
- High Resistance to Abrasive Liquids and Turbid Sandy Waters
- Semi-Open Impeller Solids Handling up to 40mm (1.6")
- Diaphragm Vacuum Pump - Oil Free Suitable for Dry Running: No Contamination of the Environment
- Mechanical Shaft Seal in Oil Bath - It Allows the "DRY RUNNING" Operation of the Pump
- Wear Plate - Cast Iron (G10 Rubber Lined) or Stainless Steel Wear Plate, that is Easily Replaceable
- Easy Maintenance - Hinged Cover for Direct Access to the Impeller (Without Lifting Devices). Link Belt Quick to Replace on the Field
PUMP PERFORMANCE CURVE
| Pump Specification Data | |
|---|---|
| Pump Specification Data Model | PAS 80MF |
| Pump Specification Data Qmax | 45L/S - 160m3/h |
| Pump Specification Data Hmax | 19m (62ft) |
| Pump Specification Data Q Max Eff. | 28L/S - 100m3/h |
| Pump Specification Data Eff. Max | 68% |
| Pump Specification Data Suction Port | Flanged - 80 TABLE E (AS 2129) |
| Pump Specification Data Delivery Port | Flanged - 80 TABLE E (AS 2129) |
| Pump Specification Data Impeller Type | Semi-Open 2 Vane |
| Pump Specification Data Solids Handling | 40mm (1.6") |
| Pump Material | G10 | F10 |
|---|---|---|
| Pump Material Casing | G10 EN-GJL-200 Cast Iron | F10 EN-GJL-200 Cast Iron |
| Pump Material Impeller | G10 EN-GJS-500 Ductile Iron | F10 CF8M Stainless Steel |
| Pump Material Wear Plates | G10 EN-GJL-200 Rubber Lined Cast Iron | F10 CF8M Stainless Steel |
| Pump Material Number of Plates | G10 2 | F10 2 |
| Pump Material Shaft | G10 39NiCrMo3 Steel | F10 39NiCrMo3 Steel |
| Pump Material Mechanical Seal | G10 Tungsten Carbide / Tungsten Carbide | F10 Tungsten Carbide / Tungsten Carbide |
| Pump Material Elastomers | G10 VITON | F10 VITON |
| Pump Priming System | |
|---|---|
| Pump Priming System Vacuum Pump | V20 |
| Pump Priming System Nominal Air Capacity | 50m3/h |
| Pump Priming System Max Vacuum | 0.9 Bar |
| Pump Priming System Separator Type | Valmatic |
| Pump Priming System Separator Material | EN-GJL-200 Cast Iron |
| Pump Priming System Drives | Link Belt |
| Pump Engine Specifications | |
|---|---|
| Pump Engine Specifications Make | Hatz |
| Pump Engine Specifications Model | 2G40 (HT44) |
| Pump Engine Specifications Type | Diesel Direct Injection Aspirated |
| Pump Engine Specifications Displacement | 997cm3 (61 in3) |
| Pump Engine Specifications No. Cylinders | 2 |
| Pump Engine Specifications Cooling | Air |
| Pump Engine Specifications RPM Type | Variable |
| Pump Engine Specifications Standard Speed | 1,800 RPM |
| Pump Engine Specifications EU Emissions | 2002/88/CE Stage V |
| Pump Engine Specifications Starting | Electric |
| Pump Engine Specifications Starting Voltage | 12V |
| Speed (RPM) | 1400 | 1600 | 1800 |
|---|---|---|---|
| Speed (RPM) Consumption (L/H) | 1400 1.3 | 1600 1.5 | 1800 1.8 |
| Speed (RPM) Power (kW) | 1400 6 | 1600 7.4 | 1800 8.6 |
| Speed (RPM) Power (HP) | 1400 8 | 1600 9.9 | 1800 11.5 |