MTP008KW HH 50HZ Submersible Pump Minetuff
| Pump Specification Data | |
|---|---|
| Motor Type | Submersible Squirrel-Cage Induction |
| Pump Type | Submersible Centrifugal |
| Ingress Protection Rating | IP68 |
| Insulation Class | Class H (IEC 85) |
| Motor Protection | Stator Thermistors in Series |
| Earth Protection | Earth Diode in Series |
| Max Allowable Consecutive Restarts Per Hour | 15 |
| Discharge Connection | 75mm BSPP Internal |
| Cable Type | Type 241.1 Screened Mining 3G6+3XE+1XP |
| Cable Length | 15m |
| Zinc Anodes | Fitted as Standard Ex Works |
| Motor Specification Data | |
|---|---|
| Rated Power | 8kW |
| Full Load Out Power | 8.8kW |
| Full Load Input Power | 10.9kW |
| Rotational Speed | 2811RPM |
| Power Factor | 0.819 |
| Motor Efficiency | 81.20% |
| Pump Efficiency | 53.10% |
| Overall Efficiency | 43.70% |
| Material Specification Data | |
|---|---|
| Outer Casing, Stator housing Bearing Housing, Oil housing & Diffusers Suction Covers | Aluminium Alloy |
| Oil Housing & Diffusers Suction Covers | Co-Polymer Polyurethane Wear Protection |
| Impellers | Stainless Steel |
| Mechanical Seals | 316 Stainless Steel / Viton + Tungsten / Silicon Carbides |
| Rotor Shaft | Duplex Stainless Steel |
| O-Rings | NBR + Hi-Temp HNBR + Viton |
| Strainer | 316 Stainless Steel |